可降解一次性环保餐具流程介绍

The main production process of degradable disposable environmental protection tableware is: according to the order requirements, it is composed of sugarcane pulp and bamboo pulp in proportion. The mixing proportion of sugarcane pulp and bamboo pulp is also different from the customer's requirements for products. Firstly, put sugarcane pulp and bamboo pulp into the hydraulic pulper according to different proportions, soak for about 5 minutes, start the hydraulic pulper for crushing, put the crushed slurry into the slurry preparation tank for dilution, add oil proofing agent and waterproof agent in the dilution process, mix the slurry evenly with the mixer of the slurry preparation tank, and then pump the diluted slurry into the slurry supply tank with a slurry pump for continuous mixing, In this way, the pulping process is completed.

将供浆池内的浆液用浆泵通过供浆管道输送到到一次性环保纸模自动生产线的成型机台，在成型机台上经过真空吸滤去掉浆液中的水分，使浆液中的纤维吸附在成型用的丝网上，形成湿胚，通过人工将湿胚和丝网一起转移到热压定型机，在230左右温度和15吨左右压力下，用热压模具将湿胚中水分挤掉，并将湿胚烘干，形成半成品。

The slurry in the slurry supply tank is transported by the slurry pump to the molding machine of the disposable environmental protection paper mold automatic production line through the slurry supply pipeline. The moisture in the slurry is removed on the molding machine through vacuum suction filtration, so that the fiber in the slurry is adsorbed on the wire mesh for molding to form a wet embryo. The wet embryo and the wire mesh are manually transferred to the hot pressing and setting machine, At a temperature of about 230 and a pressure of about 15 tons, the moisture in the wet embryo is squeezed out with a hot pressing die, and the wet embryo is dried to form a semi-finished product.

将定型后的半成品转移到切边岗位，通过切边机用切刀将多余边料去除。

Transfer the finalized semi-finished products to the edge cutting post, and remove the excess edge materials with a cutter through the edge cutting machine.

切边后产品转移到检验工序，检验工按照客户的标准进行检验，将不符合客户要求的产品挑拣出来，符合要求的产品转移到包装工序，利用紫外线机进行，经过的产品在封闭的无菌包装间包装后入库存放。

After trimming, the products will be transferred to the inspection process. The inspector will inspect according to the customer's standards, pick out the products that do not meet the customer's requirements, transfer the products that meet the requirements to the disinfection and packaging process, and disinfect them with ultraviolet disinfection machine. The sterilized products will be packaged in a closed sterile packaging room and stored in the warehouse.

一次性环保餐具https://www.qiluxinke.com专注为您提供服务,更多的精彩内容请记得持续关注我们，我们真诚为您提供服务.

Disposable environmental protection tableware https://www.qiluxinke.com Focus on providing services for you. Please remember to pay attention to us for more wonderful contents. We sincerely provide services for you